W8D076
. Applications:1969 and newer GM,Chrysler & Ford cars and trucks with tilt or tesescoping saginaw type steering columns.
. Directins for use:1.Unthread press housing from small threads of screw.2.make sure you have nut,washer and then the housing in position with open end towards small threads.3.thread screw into pivot pin as far as it will go.4.hand tighten nut while holding center screw until puller housing is pressed against steering column.5.continue to tighten nut with a 12mm wrench while holding center screw 3/8" wrench or socket until pivot pin is pulled from housing.